Workbench 1060*500 mm, with tray, front vise - HV515, side vise - HV582



Rating : (0)
Shipping: worldwide

85000 p (0) out of stock

Description

The dimensions of the workbench are 1060x500mm, the thickness of the board is 40mm. Strapping board 120mm high with dovetail connections. Front (front) vice and rear (longitudinal) vice are installed on the workbench. The front vise is made on the basis of a metal screw pair from York (Czech Republic), opening width - 225mm. The width of the movable jaw of the front vise is 350mm, the height is 110mm, and the thickness is 50mm. Longitudinal vise - sliding cracker. Made on the basis of a York screw with metal guides. This vice allows you to clamp workpieces not only for longitudinal planing, but also for sawing box spikes. Longitudinal vise stroke - 145mm. The jaw of the vise and the jaw of this model are straight, not decorated. To install the stops, a row of holes was drilled in the tabletop, 11 pieces, +2 hole was drilled in a cracker. In the strapping board on the working side, 3 horizontal holes for the stops are also drilled. Hole diameter - 19mm. At the back of the workbench there is a tray for small tools, tray depth - 35mm, width - 180mm, length - 980mm. To strengthen the pedestal between the legs, an additional upper pair of longitudinal crossbars is installed. The material of the workbench is a beech board, the pedestal and handles are solid beech. The worktop and the base are coated with Borma tung oil. The workbench must be installed on a flat horizontal surface to avoid warping and deformation of the workbench. The size of the pedestal is 1060x500x800mm, the section of the legs is 90x45mm. Workbench height - 850mm. The weight of the workbench is about 50kg. There are 2 configuration options available to order: a workbench with a pedestal and a separate workbench. Small changes may be made to the workbench design without affecting its quality. Bench stops are sold separately. All workbenches manufactured by Rubankov can be equipped with additional vertical vise and support board. The workbench can also be completed with a sub-bench for tools. Production - Rubankov workshop (Russia)

Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

%

Wooden jointer plane PETROGRAD, 65mm/600mm

Traditional wooden jointer. The plane is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam, the handle is made of paduk. Coating - tung oil and wax. The wedge is also made of maple. The installation angle of the knife is 50°. The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 175 mm, width - 65 mm, knife thickness minimum 3.5 mm, maximum thickness - 4.8 mm. Sharpening angle 25° with microbevel 30°. Dimensions of jointer plane 600 * 90 * 175 mm.

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

22830p(0)
Отзывов: 1
>Рейтинг:

Moxon vises, 380mm

Moxon vise, wooden screws. This is one of the most suitable wooden vise for making woodworking joints and especially dovetails. Jaws, handles and screws a made of wood, so you will never damage your sharp tools about it.

The vise must be installed on a workbench or other work surface such as massive table. This position is raising the workpiece to a comfortable height for sawing, marking and clear chisel cutting. The front jaw of vise is a clamping jaw. It is firmly fix the workpiece with two screws. Downside of front jaw protrudes downward for easy position vise flush to edge of surface.

  • easily and quickly attachment to surface by any fast clamp or bench clamp
  • easy vise position, flush to surface edge
  • rise worpice for comfortable work
  • max width of board for clamping - 380 mm (between screws)
  • max thickness of workpice - 30mm (jaw opening)

We make our Moxon vises from solid beech wood, so you can't damage sharp edges of your tools while working with it and if needed you can always make part of it itself.

  • vise is made of solid beech wood
  • front jaw lenght - 500 mm
  • jaw thickness - 45mm
  • width between screws - 380 mm
  • width of base plate - 100 mm
  • lenght of base plate - 545 mm

This model of vise present with wooden screws and handles ( metal screw model here ). Wooden screws can be purchased separately.

  • trapezoidal thread
  • strong and fast clamp
  • handles and screws made of hornbeam*

The Wooden Moxon vise by Petrograd toolworks was designed by Sergey Klein and was based on the early works of Anry Ruobo and Joseph Moxon. Vise have some changes from original work for more compliment work with dovetails and other woodworking joints. Moxon vise do not replace the classic workbench, but it is a devise that expands the arsenal of any master.

  • overall dimensions: 580x145x120
  • weight - 3.65 kg
  • made of soliid beech
  • oil coated

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Dimensions: 580x145x120 mm
Weight: 3.65 kg
Type: for dovetailing
Jaw material: beech
Handles: wheel
Handles material: hornbeam
Screws thread: trapezoidal
Max width of board: 380 mm
Max thickness of workpice: 30 mm
* we recommend to use wax on screws for smooth and tight turning
** we reserve the right to make minor design changes to improve the vise performance.
9900p(0)
Отзывов: 1
>Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2700p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Finnish type, 175mm/45mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 60°

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Checkering tool complete C-1, 90°

Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters.
The wooden handle is made of beech, well balanced and lies comfortably in your hand.
Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained.

The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

900p
Отзывов: 1
Рейтинг:

Outdoor axe PETROGRAD, model Roslavl 7, scandy bevel, handle n11

Hand forged outdoor axe Roslavl VII with curved handle. Axe as a woodworking tool has superior cutting abilities, short handle and would be good choiсe for any outdoor activity like campings, spoon making, making bonfire and etc. This axe is ideal for those who want take a small axe for different ways of use when you are going out and about in the countryside. Although it is light, it can be used to fell a small or even midle tree, thanks to its handle and heavy, strong head. The axe is also excellent for delimbing a tree and making wooden stakes.

  • Total lenght is 370mm ( 14,57inch )
  • Height of axe is 140mm ( 5,51inch )
  • Lenght of cutting edge is 120mm ( 4,72inch )
  • Axe is hand forged from 65G steel (Germany 66Mn4, Ck67, USA 1066).
  • Curved cutting edge was straight sharpened.
  • Total weight of axe is 0,7kg  ( ± 0,05kg )
  • Handle lenght is 320mm ( 12,6inch) and it is made from solid mapple with right grain position.
  • The axe comes with leather case for protecting cutting edge.

Axe is well balanced and would be a good choice for a lot types of work. It will be great as outdoor axe, for small carpentry and othe woodwork projects. This is kind of universal axe for everyone.

Axe Roslavl VII produced by Petrograd toolworks in Saint Petersburg Russia.

Axe Roslavl VII Specifications:
Head weight: 0.63 kg
Full weight: 0.7 kg
Type: outdoor hatchet
Steel: 65Г
Hardness: 55-58HRc
Handle material: Ash*
Handle lenght: 320 mm
Edge: Curved
Sharpening angle: 30 degrees
Blade lenght: 120 mm
Total lenght: 370 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
13000p
Отзывов: 1
Рейтинг:

Leather Knife PETROGRAD, type 1, double bevel

Leather Knife type 1 is a leather Head knife, also known as Round knife or even a Half-Moon knife. Head knife has double-sided sharpening. It's one of the oldest and most versality leather workning tool.

  • for straight cuts
  • for curved cuts
  • for skiving
  • for multiple layers cut

Leather knife type 1 by Petrograd toolworks comes with a leather sheath. Edge is perfectly sharpened and reade to work out of the box.
This type of knives is used in handicraft, leather, and shoemaking.

  • blade made of tool alloy steel 9ХФ
  • blade thickness - 2 mm
  • edge radius - 61 mm
  • handle made of wood *
  • oil covered **

Handles are made of wood and fixed with 2 brass rivets. The kit includes a neat stitched leather case.
Knives for leather work are produced by Petrograd toolworks in Saint Petersburg Russia

Weight: 0.2 kg
Type: round knife
Steel: 9ХФ
Hardness: 58-61 HRc
Handle material: beech*
Handle lenght: 110 mm
Edge: curved
Sharpening: double sided
Blade lenght: 120 mm
Total lenght: 175 mm
 * material of handles may changes from batch to batch.
** coating oil may changes too
5130p
Отзывов: 1
Рейтинг:
new

Spoon knife, PETROGRAD, type 1/22, left-handed

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, skew type, 45 degrees

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:
new%

Outdoor axe PETROGRAD, model Roslavl X, handle

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: